Direct drive programmable lockstitch sewing machine. Designed to sew a variety of programmable stitches in the 500x100mm sewing area on products from a variety of medium to extra-heavy fabrics. It is most convenient for pattern sewing of small items along a given contour. Often used for sewing on labels and all kinds of labels, for decorative finishing of bags, shoes and sewing slings, seat belts.
Revolutionary NEXIO Control System
freeform sewing pattern creation tools (programmer is no longer needed),
custom instructions with pictures,
management of service modes,
self-diagnostics, notification of errors and methods of their elimination,
All this makes NEXIO the best user interface!
Requires connection to compressor.
Specifications:
Sewing area (XY): 500 X 100 mm
Stitch length: 0.05 - 12.7 mm
Lift of the presser foot - 22 mm
Walking foot stroke - 0; 2-10 mm (factory setting 3 mm)
Enlarged shuttle
Pneumatic control control
Automatic lubrication
Maximum sewing speed up to 2800 sti / min
Maximum number of stitches per program 20,000 sts
Power 550 W
Power supply 220 V, 50 Hz
Air supply 0.5 MPa, 1.8 l / min
Transferring data using a compact flash card (CF card)
The machine has three subclasses: - 03 for medium materials / - 05 for heavy materials / -07 for seat belts
Needles
DPx5 # 100 - for medium materials
DPx17 # 120 - for heavy materials
DPx17 No. 180 - for seat belts
Main advantages:
Highest quality stitching
While sewing, the walking foot holds the fabric securely around the needle and avoids skipped stitches when moving from one thickness to another. The shape of the bartack does not change even when sewing at high speed and on heavy materials. Curved seam lines are precise and straight.
NEXIO software
The large touch screen and simple software provide intuitive operation even without reading the instructions.
Creating a sewing program is done in fewer steps and with less effort than with previous generations of machines or other manufacturers.
Puncture force
The powerful 500 watt motor ensures high revolutions even at low sewing speeds. This allows a significant force to be obtained to pierce the needle. If the needle meets resistance, the control system automatically increases the force.
Fast and accurate positioning of the clamps
This advantage was achieved by controlling the clamps with a stepper motor. Clamp travel step 0.05 mm.
Minimum noise and vibration
Every detail is balanced and has gone through the most advanced computer analysis, so noise and vibration have been reduced to their ultimate limits.
Energy saving
This machine is the most energy efficient among the machines of the same class.
Additionally, the machine can be equipped with
Needle cooling device.
Pneumatic foot lifting device (driven by a stepping servo motor is included in the basic package).
Automatic sewing machine BAS-326G 500x100, performing a sequence of the following automatic operations in accordance with the specified algorithms:
- Sewing various programmable stitches with a predetermined sewing speed, raising and lowering the presser foot, presser foot pressure and puncture force;
- Possibility of programming values for sewing direction, stitch length, number of lines and number of stitches in each line,
- Possibility of programming the values of the position and edge of the part being sewn;
- Possibility of programming the values of the tension of the upper thread;
- Programmable needle positioning function;
- Programmable automatic thread trimming function;
- Automatic control of skipping stitches;
- Ability to create and save sewing programs in the memory of the machine.